Polyx Oil® - 2K Pure

Product Information
High-quality solvent-free 2-component oil that produces a microporous and breathable surface with only one coat. Resistant to wine, beer, cola, coffee, water, etc. acc. German DIN 12720 (formerly 68861-1C). When dry, the coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).
Osmo 2K Wood Oil has a matt finish and is suitable for all parquet and wooden flooring (solid wood, plank, strip, stairs, etc.) acc. German DIN 18356 as well as furniture surfaces. Especially suitable for oily and resinous hardwoods and commercial interiors, which require the use of a solvent-free product.

Advantages: 
- Solvent free 2-part component
- Fast curing time
- Attractive colour tones
- Specifically for commercial use – high traffic areas
- Suitable for all woods including exotic woods with high wax content
- No sanding necessary for spot repairs or future applications
- Based on natural oils and waxes
- Enhances the woods natural character
- Very durable and hard wearing
- Very water and dirt resistant
- Extremely stain resistant
- Resistant to wine, cola, tea, coffee, water and fruit juices
- Microporous breathable finish which does not crack, peel or flake

Product Details:
- Coverage: 40-50m2/L per coat
- No of Coats: 1
- Application: Double-Blade Scraper, Professional Scraper, Microfibre Roller and HandXcenter
- Drying Time: 24 hours
- Can size: 375mL, 1L
- Finishes: Clear and various colours
- Storage times: 2 years and longer if stored in the closed original can. If thickened by frost, store at room temperature for 24 hours prior to use. Leftover mixed product cannot be stored and reused.

Additional Advice:
Osmo 2K Wood Oil is not ready to use. Shortly before the application, add the hardener (mixing ratio 100:12 vol.-%) and mix both components thoroughly. Do not thin. Pot time is approx. 3-4 hours. Wood surface must be clean, sanded, dry and frost-free (moisture content max. 20%). Clean old microporous stains thoroughly.
Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler or Osmo Wood Putty 7350). Sand wood surfaces carefully. Begin with coarse sandpaper –final sanding at P120. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface is influenced by several factors, including the condition of the wood.
A trial is always recommended first to determine suitability.
Apply 2K Wood Oil thinly with Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper. On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints. Wait approx. 20-40 minutes for the oil to penetrate the wood. Afterwards buff oil into wood and even out the surface with a single disc machine and a white or beige pad (or ideally on furniture with Osmo HandXcenter and a white pad). Leave the surface to dry. Note: If the single disc machine leaves streaks due to too much product, we recommend turning over the pad or replacing it. To prevent a possible pressure build-up in the container, allow oil and hardener mixtures to completely react before closing (approx. 12-16 h).
Note:
2K Wood Oil must be used solely with the hardener which was developed for it. Leftover mixed product cannot be used after pot time has expired and must be disposed appropriately.